Yes, absolutely. You can mount a TV on a plaster wall. This is because it is not the plaster wall that supports the weight of the TV. It is the stud and laths that provides support to its weight. To mount a TV on a plaster wall, all you need are a secure position and appropriate hardware.
To mount a TV you need a few types of equipment enlisted below-
TV mountMounting anchorsPower drillMasonry drill bitScrewdriverClean towel or drop clothA mate to help
To mount a TV on a plaster wall, you need to follow some common steps as mention below-
Choose A Suitable Spot
Before mounting a TV you need to choose a suitable spot keeping a few things in mind, as –
The television should be visual from all angles. It should be placed at an appropriate distance from the couch so as not to affect your eyesightIt should be placed at a proper height so that kids don’t destabilize it. Make sure the height of the TV agrees to the eye level. Its location should be near the power socket.
Locate Vertical Studs In The Wall
The easiest way to locate studs in the wall is by using a stud finder. Grab a stud finder from the market. Hold it against the wall and turn it on. If it detects wooden support, it starts beeping. Now mark the location of the stud with a pencil.
How To Find Beams Without A Stud Finder?
If you do not possess a stud finder, do not worry. You can locate a stud manually. Knock against the wall. The area around the stud usually produces a high-pitched sound. If you hear a high pitched sound you have probably discovered the location of the stud. Now, level the mount on the wall. You can use a carpenter’s level for it. Keep the mount as level as possible. Now mark its location with a pencil. You can ask someone to assist you in this job.
Use Of Anchors
Now you need strong duty plaster anchors which can uphold the weight of the TV. Toggle bolts or Molly bolts are often used for this purpose. The anchor should be compatible to bear the weight of the TV.
Metal anchors are better than plastic anchors. Stay cautious while choosing the anchors as you cannot use anchors meant for the drywall in the plaster wall, otherwise, it will put a crack in the plaster.
Drill Pilot Holes In The Wall
Now you have sought the perfect location to mount your TV. The next step should be to drill holes in the wall. You can use a masonary drill to make holes of around 0.2 cm in diameter. Attach the bracket to the wall with anchor screws.
Mounting The TV
The final step is to mount the TV. Put the TV upside down on a flat surface like a carpet. Handle the TV with caution. Check the back of the TV if there is any screw hole placed in the center. If there is a plastic attached to it, remove it first. Rest the mounting plate on the TV such that it gets aligned with each screw hole. Insert the screw properly until it gets stuck to the back of the TV.
Stability Check
Now you need to check if the TV is stable on the wall. Move your TV side by side. Try to pull it forward. If it is well aligned on the mount, it won’t come out. Otherwise, re-hang the TV repeating the process.
Points To Keep In Mind
Take the help of a friend or a family member to help you mount the TV and hold the equipment.
If you make holes in the wrong place by mistake, you can use a plaster patch to cover it. A plaster patch can be made at home using toothpaste.
Attach all the electronic cords and wire properly.
Try to Mount the TV at a higher distance from the ground.
If you find it difficult to hang the TV, you can call the customer care executive for help
Choose the appropriate location to mount the TV so that it adds to the beauty of the room.
Conclusion
Gone are the days when we used to buy a table to place the TV. In the modern world, we just hang it out on the wall, adding to the beauty of the room and soothing to the eyes. Following these basic steps, you can hang your TV on a plaster wall in a proper manner. Hope you like it.
